XSF SERIES HEADBOARD BRACKETS INSTALLATION
*Headboard Bracket Installation Guide (Optional)
Headboard brackets are optional and not included. A ½” (13mm) socket and ½” (13mm) wrench are required to complete the installation. 
Step 1
- Align the slot hole of the headboard bracket to the sleeve into which the leg threads. DO NOT OVERTIGHTEN. Too much force may damage the thread.
- The headboard bracket has 2 adjustable slots to accommodate any frame type. Use the bolts and washers to secure the bracket. Make sure the bolts are tight.
Step 2
- To put the T-Bracket and Headboard Bracket together, you will need (2) M8x16 bolts but (2) nuts. Slip the bolts through the holes from T-Bracket to Headboard Bracket with the head of the bolt facing outward. Use the ½” (13mm) socket and ½” (13mm) wrench to tighten the bolts.
Step 3
You may now connect your headboard to the attachment plates using the remaining short bolts and nuts to secure it to the brackets. The heads of the bolts will face outward. Use a ½” (13mm) socket and ½” (13mm) wrench to tighten the bolts.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article