Pairing Instructions

LCD SCREEN REMOTE

1. Unplug the base from the power source & wait until the green light on the transformer box is off. 
2. On the remote, press and hold the “SELECT” button until the word “PAIR” shows on the screen. 
3. Place the remote on a flat surface, away from the bed. 
4. Plug the bed back into the power source. 
5. The adjustable base will make an audible beep when connected. 
6. After the beep, the remote will display various numbers, then turn off. 
7. Pick up the remote and use it normally. 

BUTTON ONLY REMOTE

1. Unplug the base from the power source & wait until the green light on the transformer box is off. 
2. On the remote, at the same time, press & hold the HEAD DOWN button & the center HOME button for 10 seconds or until the blue backlights turn off. 
3. Place the remote on a flat surface, away from the bed. 
4. Plug the bed back into the power source. 
5. The adjustable base will make an audible beep when connected. 
6. Pick up the remote and use it normally. 

If you are unable to resolve the pairing issue, try replacing the 3 AAA batteries inside the remote.