Syncing TXL King Beds

*BOTH REMOTES ARE NEEDED FOR THIS FUNCTION TO WORK PROPERLY*

When syncing two beds to function as one, follow these steps before putting the sync cord on:

First you will need to unplug both beds from the power source. Remove batteries from each remote.

Working with one base at a time:

Program one remote by following the pairing instructions for that model of bed. Leave the first base unplugged while following the same steps to pair the second base. It may be necessary to mark each remote to indicate which base it goes to.

*The sync cords must be plugged in properly; there are notches on the cord that line up with notches on the control box port*

Once both beds are working independently with their own remotes, unplug both beds from the power source and plug the sync cord into both control boxes.

Plug both beds back into the power source.

Either remote will ONLY raise and lower bases. For use of other features such as massage and LED lights, customers will have to use the remote for that side of the bed.

For assistance, please contact us at 844-696-6886.